Weltrend

Products

WT6619F

【 General Description 】

The WT6619F is a dual-port USB Power Delivery (USB PD) controller that supports USB PD 3.0 specification. It can be configured as a dual-role device (external circuitry required) and supported functions including cable attached/detached detection, cable plug orientation/twist detection, and Dual-role Power (DRP) with source/sink power role swapping mechanism as well.

With the DisplayPort (DP) Alt-mode over USB-C capability, it can perform functions such as DP configure, status update, source/sink connection detection, DP mode Discovery/Enter/Exit, and support vendor define message (VDM) function/hot-plug detection (HPD) for intelligent USB Power Delivery as well. It is designed for USB Type-C® power applications such as Projector, portable LCD monitor, PC Monitor, TV, and Tablet.

The WT6619F minimizes external components by integrating USB PD baseband PHYs, USB Type-C detection, and an 8-bit MCU to allow flexibility, small form factor and low BOM cost. Wide operation voltage range (3V to 24V) supports high voltage CC pins to avoid the short circuit damage between Vbus and CC pins. That makes WT6619F having a robust and reliable design. A Multi-Programmable (MTP) ROM is built-in for storing program code and user configuration data.

【 Features 】
●	Integrated two USB-PD PHYs
	- Supports USB PD 3.0
	- Programmable USB Type-C pull-up Rp
	- Integrated VCONN power and switch for reading E-marked cable
●	Integrated two USB charge detect blocks, supports USB BC1.2 DCP
●	Integrated two VBUS voltage/current control
	- Programmable constant voltage control
	- Programmable constant current control
	- Integrated high side current sense amplifier
	- Cable drop compensation
●	Programmable fault protections
	- Over Voltage Protection (OVP)
	- Under Voltage Protection (UVP)
	- Over Current Protection (OCP)
	- Over Temperature Protection (OTP)
●	DP Alt-mode
	- Support DisplayPort Alt Mode on USB Type-C Standard
	- DP configure, status update, source/sink connection detection
	- DP mode Discovery/Enter/Exit
	- Support VDM (Vendor Define Message) function
	- Hot-plug Detection (HPD)
●	CC1/CC2/D+/D- Pins Over Voltage Protection
●	10-bit ADC for voltage and current monitoring
●	MCU
	- Turbo 8051 compatible MCU
	- 32K bytes Multi-Time-Programmable(MTP) ROM
	- 1K bytes SRAM
●	Driver for NMOS load switch
●	Built-in discharge MOS transistor
●	Internal RC oscillator
●	Internal VDD regulator
●	General purpose I/Os
●	Supports power saving mode
●	Operating voltage range: 3V to 24V (30V tolerant)
●	Operating temperature range: -20°C to +105°C
●	Package: 32-pin QFN

BACK