WT56F232
| 【 General Description 】 |
| The WT56F248/232 is a general-purpose single chip Microcontroller with LCD function provided by Weltrend, a well-known IC Design House in Taiwan. In addition to using the advanced IT 8052 single-chip core, wide and low operating voltage range (2.2V ~ 5.5V), and high noise immunity, the product consists of 48Kx8 (32Kx8 for WT56F232) Flash Program Memory, 1024x8 RAM (768x8 for WT56F232), abundant peripheral resources and versatile power management (refer to the content for more details). The above features make the WT56F248/232 suitable for a wide range of applications, especially in areas such as home appliances with LCD (rice cooker, microwave oven, and toaster), Thermo-Hygrometer, bidirectional car alarm, remote controller of air conditioner, and so on. The WT56F248/232 is a low cost high performance product with kinds of package to replace the mainstream products on the market (refer to “Pin Configuration” section for more details). In order to contribute more competitive ability, Weltrend also provides dice and wafer sale for the customer. |
| Part No. | PROM | SRAM | I/O(Max) | LCD(SxC) | PWM(BitxCh) | ADC(BitxCh) | PKG Type |
| WT56F216 | 16KB | 384B | 44 | 8(4)x19 8(4)x16(20) |
16-bitx2 | 12-bitx16 | 44LQFP 28SOP |
| WT56F232 | 32KB | 768B | 54 | 8(4)x19 8(4)x16(20) |
16-bitx6 | 12-bitx16 | 64LQFP 44LQFP 32QFN |
| WT56F248 | 48KB | 1024B | 54 | 8(4)x19 8(4)x16(20) |
16-bitx6 | 12-bitx16 | 64LQFP 44LQFP |
| 【 Features 】 | |
| ● | 1T 8052 core, MCS-51 instruction set compatible |
| ● | Instruction execution time: Min. = 41.67ns @24 MHz |
| ● | 1024/768 Bytes of RAM (256 Bytes of standard 8052 internal Data RAM and 768/512 Bytes of external RAM) |
| ● | 48K Bytes of flash memory for program storage (32K Bytes for WT56F232) |
| ● | Supporting Dual Clock Oscillators: |
| - Main clock: External DC ~ 24 MHz Crystal Oscillator or Internal 12/24 MHz RC | |
| - Sub clock: External 32.768 kHz Crystal Oscillator or Internal 32 kHz RC | |
| ● | Dual 16-bit Data Pointers (DPTR0 & DPTR1) |
| ● | Three 16-bit Timer/Counters (Timer0, Timer1, Timer2) |
| ● | One Watchdog Timer (WDT) |
| ● | One Watch Timer |
| ● | One 16-bit Enhanced Timer with Capture function |
| ● | Two UARTs (UART0, UART1), support baud rate 1200 bps ~ 230400 bps (at 24 MHz) |
| ● | Emulated E2PROM |
| ● | One master/slave SPI interface |
| ● | One master/slave I2C interface |
| ● | Six 16-bit PWMs (PWM0~5) |
| ● | LCD Control Driver |
| - Mode A: 4 COM x 19 SEG or 8 COM x 19 SEG | |
| - Mode B: 4 COM x 20 SEG or 8 COM x 16 SEG | |
| ● | 16-channel 12-bit Analog/Digital Converter (ADC0 ~ ADC15) with Voltage Reference source |
| ● | One Comparator with 32-level Voltage Reference sources |
| ● | Three power-saving modes: Sleep mode, Green mode and Idle mode |
| ● | 16 external Interrupt IRQ pins (IRQ0 ~ IRQ15) |
| ● | 54 programmable bi-directional I/O pins, 15 of them with both high current sink/source ability (20 mA) |
| ● | One Buzzer, with four selectable frequencies and three output paths |
| ● | Low Voltage Detection (LVD) and Low Voltage Detection Reset (LVDR), both of them are programmable |
| ● | On-chip Power On Reset (POR) and Low Voltage Reset (LVR) |
| ● | Built-in single-wire In-Circuit Emulator (ICE) and In-System Program (ISP) |
| ● | Read Out Protection and Code Encryption |
| ● | Operating voltage range: 2.2V ~ 5.5V |
| ● | Operating temperature: -40℃ ~ +85℃ |
| ● | Dice & Package: LQFP64, LQFP44, and QFN32 |
Follow us
